A wireless access point (WAP) connects a group of wireless devices to an adjacent wired LAN. An access point is similar to a network hub, relaying data between connected wireless devices in addition to a (usually) single connected wired device, most often an ethernet hub or switch, allowing wireless devices to communicate with other wired devices.
Wireless adapters allow devices to connect to a wireless network. These adapters connect to devices using various external or internal interconnects such as PCI, miniPCI, USB, ExpressCard, Cardbus and PC card. Most newer laptop computers are equipped with internal adapters. Internal cards are generally more difficult to install.
Wireless routers integrate a Wireless Access Point, ethernet switch, and internal Router firmware application that provides IP Routing, NAT, and DNS forwarding through an integrated WAN interface. A wireless router allows wired and wireless ethernet LAN devices to connect to a (usually) single WAN device such as cable modem or DSL modem. A wireless router allows all three devices (mainly the access point and router) to be configured through one central utility. This utility is most usually an integrated web server which serves web pages to wired and wireless LAN clients and often optionally to WAN clients. This utility may also be an application that is run on a desktop computer such as Apple's AirPort.
Wireless network bridges connect a wired network to a wireless network. This is different from an access point in the sense that an access point connects wireless devices to a wired network at the data-link layer. Two wireless bridges may be used to connect two wired networks over a wireless link, useful in situations where a wired connection may be unavailable, such as between two separate homes.
Wireless range extenders or wireless repeaters can extend the range of an existing wireless network. Range extenders can be strategically placed to elongate a signal area or allow for the signal area to reach around barriers such as those created in L-shaped corridors. Wireless devices connected through repeaters will suffer from an increased latency for each hop. Additionally, a wireless device connected to any of the repeaters in the chain will have a throughput that is limited by the weakest link between the two nodes in the chain from which the connection originates to where the connection ends.
Distance records
Electronics portal
Distance records (using non-standard devices) include 382 km (237 mi) in June 2007, held by Ermanno Pietrosemoli and EsLaRed of Venezuela, transferring about 3 MB of data between mountain tops of El Aguila and Platillon. The Swedish Space Agency transferred data 310 km (193 mi), using 6 watt amplifiers to reach an overhead stratospheric balloon.
Embedded systems
Embedded serial-to-Wi-Fi moduleWi-Fi availability in the home is on the increase.[10] This extension of the Internet into the home space will increasingly be used for remote monitoring.[citation needed] Examples of remote monitoring include security systems and tele-medicine. In all these kinds of implementation, if the Wi-Fi provision is provided using a system running one of operating systems mentioned above, then it becomes unfeasible due to weight, power consumption and cost issues.
Increasingly in the last few years (particularly as of early 2007), embedded Wi-Fi modules have become available which come with a real-time operating system and provide a simple means of wireless enabling any device which has and communicates via a serial port. This allows simple monitoring devices – for example, a portable ECG monitor hooked up to a patient in their home – to be created. This Wi-Fi enabled device effectively becomes part of the internet cloud and can communicate with any other node on the internet. The data collected can hop via the home's Wi-Fi access point to anywhere on the internet.
These Wi-Fi modules are designed so that designers need minimal Wi-Fi knowledge to wireless-enable their products.
No comments:
Post a Comment